成人影视久久一区丝袜美腿,色情免费100部A片看片,国产精品久久久久久久久99热,69久久夜色精品国产69蝌蚪网,翁公吮她的花蒂及奶水风紫阳,九色丨熟女丨高潮,玩弄美艳馊子小说短篇,插的太爽好丰满

美國vanguard SGT-200安全接地測試儀
美國vanguard SGT-200安全接地測試儀
產品價格:¥(人民幣)
  • 規格:SGT-200
  • 發貨地:上海
  • 品牌:
  • 最小起訂量:1件
  • 誠信商家
    會員級別:鉆石會員
    認證類型:企業認證
    企業證件:通過認證

    商鋪名稱:上海山合海融商貿有限公司

    聯系人:孫寶金(先生)

    聯系手機:

    固定電話:

    企業郵箱:sh@51082245.com

    聯系地址:上海市寶山區陸翔路678弄60號

    郵編:201907

    聯系我時,請說是在五金機電網上看到的,謝謝!

    商品詳情

      The Vanguard SGT-200 Safety Ground Tester is a 200A DC micro-ohmmeter designed specifically to measure the resistance of protective in-service grounding and jumper cable assemblies. The SGT-200 can measure the resistance of the grounding cables, clamps and ferrules. The measured resistance values can be compared against the calculated values (using the ASTM 2249-03 standard) and a Pass/Fail result can be printed along with the measured resistance values. Since the SGT-200 uses a DC current, there is no need to uncoil the cable under test. It can be conveniently tested in its coiled state in a much smaller testing enviornment.

      The SGT-200 can measure resistance value from 1 micro-ohm to 1000 milliohms. A typical test requires the two ends of the safety ground cable to be connected to the terminals of the SGT-200. The resistance of the cable and ferrules can then be measured. If the cable size, cable length and temperature are provided, the SGT-200 will determine if the cables passes or fails the test and a pass/fail indicator will be printed on the test report.

      Test results are printed on the unit's built-in 2.5” thermal printer. A 44-key QWERTY-style rugged membrane keypad is used to input information and control the SGT-200. A back-lit graphic LCD screen (128 x 64 pixels) is used to display menus and test results.

      The SGT-200 can store up to 100 test records in its internal memory. It also features a USB Flash drive interface port that can be used to store test data in a USB flash drive (not included). The SGT-200 also features an RS-232C port that is used for factory diagnostics and calibration. Test records can be reviewed and printed on a PC using the provided Vanguard VUS software.

             

      SGT-200

      Technical Specifications

       
             
      TYPE Safety Ground Tester
      PHYSICAL SPECIFICATIONS Dimensions: 21”W x 8”H x 14” D (53.3 cm x 20.3 cm x 35.6 cm)
      Weight: 31 lbs. (14.1 Kg)
      INPUT POWER 100 – 240 Vac, 50/60 Hz
      RESISTANCE READING RANGE
      1 micro-ohm to 1000 milliohms
      (max 1.5 milliohms @ 200A, 450 milliohms @ 10A, 1000 milliohms @ 1A)
      TEST CURRENT RANGE
      10A  – 200A (selectable in 1A steps);
      thermally protected DC power supply
      ACCURACY 10A – 49.9A: 1% ±2 micro-ohms
      50A – 200A: 1% ±1 micro-ohm
      TEST VOLTAGE 5 Vdc
      DISPLAY Back-lit LCD screen (128 x 64 pixels); viewable in bright sunlight and low-light levels
      KEYPAD Rugged, 44-key "QWERTY" membrane keypad
      INTERNAL TEST RECORD STORAGE 100 test records
      EXTERNAL TEST RECORD STORAGE Up to 999 test records on external USB flash drive
      PC SOFTWARE Windows?-based analysis software is included with purchase price
      COMPUTER INTERFACES One RS-232C PC interface, one USB flash drive interface
      PRINTER Built-in 2-1/2” wide thermal printer
      SAFETY Designed to meet IEC 61010 (1995), UL 61010-a, and CAS-C22.2 standards
      TEMPERATURE
      Operating: -10°C to +50°C (+15°F to +122°F)
      Storage: -30°C to +70°C (-22°F to +158°F)
      HUMIDITY 90% RH @ 40°C (104°F) non-condensing
      CABLES AND ACCESSORIES
      power cord, ground cable, standard cable stud (1" dia, 2 pcs), elbow adapter (female, 1/2" dia, 1 pc), bushing adapter (male, 1/2" dia, 1 pc)
      ALTITUDE 2,000 m (6,562 ft) to full safety specifications
      OPTIONS Shipping case
      WARRANTY One year on parts and labor
      Specifications are valid at nominal voltage and ambient temperature of +25?C (+77?F).
    0571-87774297